Rapid Flash Point Tester

Name: Flash Point Tester -22/572F w/Ext Gas
Price: 5025.0 USD
Availability: InStock

Article No. 11444

Flash Point Tester -22/572F w/Ext Gas

The Rapid Tester® is a semiautomatic instrument for determining the flash point temperature / combustibility of flammable liquids. Closed cup test temperatures from ambient to 572°F (300°C) are automatically controlled by the set-a-temp adjustable digitally preset target temperature circuitry. Integral digital LCD display, NIST traceable thermometer, and electronic timer are standard.

Select your model

excl. taxes & shipping cost

Features

Achieve high level of digital performance, better than 99% comparability
High contrast LCD display has 1/2" characters for ease of reading
Switch selectable between degrees Fahrenheit and Centigrade
Includes External Gas Adapter
A thermometer traceable to the National Institute of Standards & Technology is also included
Test time is only one minute with a 2 ml sample for flash points below 212°F (100°C)
Run ten tests with the Rapid Tester® in the time that it takes to perform just one by other methods
The 2 ml/4 ml sample is a fraction of the large sample required by other flash point methods which reduces sampling and disposal problems while improving safety
Quality Assurance - Verify the formulation of liquid products with flammable ingredients
Compliance Testing - Often required by regulatory agencies before transport or disposal of liquid
Fuel Dilution - Determine the relative percentage of fuel in engine crank case oil to forecast the need for engine rebuilding.
Independent laboratory testing has demonstrated that the ASTM D3828 test method utilized by the Rapid Tester® correlates well with other flash point methods. In ASTM D-2 Round Robin testing it was found that the ASTM D3828 test method has the following correlation coefficients:
- D3828 (Rapid Tester®) vs. D56 (Tag) = 0.9949
- D3828 (Rapid Tester® vs. D93 (Pensky-Martens) = 0.9943
- D56 vs. D93 = 0.9926

Technical Attributes

Data

Part No.	11443	11444	11446	11447
Cup Type:	Closed Cup
Temperature:	-22° to 572°F (-30° to 300°C)
Material:	Aluminum Test Cup, Lid & Shutter		316 Stainless Steel Test Cup, Lid & Shutter
Adapter Voltage:	External Gas Adapter 220V	External Gas Adapter 110V	External Gas Adapter 220V	External Gas Adapter 110V

More Information

Warranty - Rapid Tester instrumentation is warranted against defects in materials and workmanship for one year from date of shipment and will be repaired or replaced at our option. This warranty is exclusive of shipping charges, consumable components or misuse. The liability of Gardco is limited to such repair or replacement. No warranty of fitness for a particular purpose or liability for consequential or other damages shall be implied.

Note: This contains only a general description of the Rapid Flash Point Tester. While uses and performance capabilities are described, under no circumstances should the product be used except by qualified, trained personnel and not until the instructions, labels, or other literature accompanying it have been carefully read and understood and the precautions therein set forth followed. Only they contain the complete and detailed information concerning this product. Not intended for use in hazardous areas. The manufacturer reserves the right to alter design and/or specifications without notice. Please note that butane cylinders in Rapid Tester holders must be constructed of black acetyl plastic to retrofit,

Standards

ASTM D3278

ASTM D3828

ASTM D4206

BS 3900 Part A11

BS 3900 Part A13

BS 3900 Part A14

CPSC CFR 16-1500.43a

DOT CFR 49-173.115

IATA Resolution 618 Attachment A

IP 303

ISO 3679

ISO 3680

OSHA 29CFR 1910-106

OSHA 29CFR 1910-1200

Procedure

Unique set-a-temp circuitry permits simple adjustment and precise automatic regulation of test temperatures.
Depress the Preset switch while turning the Temperature Control knob until the target temperature is displayed.
Release the switch and set-a-temp takes over!
Test cup temperature is automatically shown on the digital LCD display.

Delivery Content

Integral digital LCD display, External Gas Adapter, NIST traceable thermometer, electronic timer, syringe, heat transfer compound, AC cord and directions.

Downloads

Manuals