Digital Handheld Laser Tachometer

Article No. 13273

Laser DT-205LR Tachometer w/6" Wheel

The Digital Handheld Laser Tachometer is a microprocessor controlled digital hendheld laser tachometer with NIST Certification. It has a notable exception of a new Bright Red Laser aiming dot and RPM measurements up to 20 feet.

excl. taxes & shipping cost

Features

Safety compliant
Features an expanded memory (ten independent readings plus last, max and min.)
Expanded measuring range of up to 99,999RPM
Great for RPM measuring without switching off machine
Battery life is 7 times greater
Laser accurate measurements at safe distances through protective devices
The included contact adapter enables the measurement of five additional rate functions (RPM, YPM, mPM, FPM and IPM) as well as four length functions (yards, meters, feet and inches).1/4 x 20 tripod mounting hole included.
Reduced to 2 AA batteries .
The DT-205LR-S12 has a 12" master wheel which rotates more slowly than the standard 6" wheel, thus enabling confident and safe high speed measurement.

Technical Attributes

Data

Measuring Range:	6 to 99,999 rpm
Accuracy:	±1 rpm: 6 to 8,300 rpm ±2 rpm: 8,300 to 25,000 rpm ±0.006% of reading ± 1 digit (or ±6 rpm max.): 25,000 to 99,999 rpm
Display:	5 digit 0.47" (12mm) high LCD
Measuring Units:	RPM (on contact using adapter, included) for YPM, mPM, FPM, IPM and Length: YRD, MFT and IN use 6" cir. wheel with 200L adapter
Memory:	13 readings are stored in memory and retained for 5 minutes (last, max., min. and 10 extra measurements)
Display Update Time:	1 second typical
Detection:	Laser diode
System Control:	Single-chip C-MOS microprocessor
Over Range Indicator:	Flashing numerals
Voltage Requirement:	Size: 2 AA 1.5V
Battery Life:	Life: Approx. 40 hours
Low Battery Indicator:	Flashing "LO BAT" display
Auto Power Shut-off:	Yes
Operating Temperature:	32° to 113°F (0-45°C)
Construction:	Die-cast aluminum housing
Weight:	0.8 pounds (365g)
Dimensions:	6.6"L x 2.4"W x 1.8"H (167mm x 61mm x 45.7mm)
Warranty:	1 year

Standards

With NIST Certification

Delivery Content

Reflective Tape (1" x 7-3/4" Strip) 1/2" x 1/2" - 35 Tabs, Cone Adapters: Standard 1/2" ( Optional 3/4", 1-1/4"), Funnel Adapters: Standard, 3/4", Measuring Wheels: FPM (6” or 12" cir.) YPM (0.1 yrd. cir.) mPM (0.1 met. cir.), Extension Shaft: 3-1/2", NIST traceable certificate.