MMS Inspection DFT Coating Thickness Gauges

• Data

  Gauge type FE and FE+NF:		Magnetic induction method (ISO 2178, ASTM D7091, Measurement of non-magnetic coatings on magnetic substrates)
  Gauge type FE+NF - Automatic selection of the measuring method corresponding to the substrate material:		Eddy current method (ISO 2360, ASTM D7091, Measurement of non-conductive coatings on non-magnetic substrate metals)
  Factory Calibration:		Each individual gauge is factory calibrated at several reference points with the greatest care to ensure the highest possible degree of trueness.
  Data Memory:		The contents of the memory is retained even without batteries; subsequent viewing of the measured individual values and evaluations - Variant Start with memory capacity of max. 10,000 measured values in 1 batch, Variants Enhanced and High with memory capacity of 250,000 measured values in 2500 batches
  Evaluation:	Statistics:	Batch-Template-Package Basics: Display of mean value, standard deviation, min/ max values and number of measurements per block, per batch, coefficient of variation, number of measured values lower/upper the set limit values Batch-Template-Package Corrosion: Depending of the selected measuring regulation; e.g. for SSPC-PA2, Display per measurement location (Spot)/area section (Area): Number of (Spots), mean value, standard deviation, coefficient of variation, min./max. values, Range, measured values < 80 %/> 120 % of limit values (coating thickness restriction level 3)
  	Graphic Presentation:	Histogram, when using the batch template package Basics
  Probe:		Single tip axial probe with spring-loaded measuring system and with wear-resistant probe tip built-in into gauge. Probe tip radius: 78.7 mils (2 mm); Probe tip material: Hard metal
  Measurement Interval:		More than 140 measurements per minute
  Display of Measurement Capture:		Audible by a short beep, visual by colored illuminated LED and by gauge vibration
  Display for Limit Monitoring:		Limit Violation: Audible by 2 short beeps, visual by red illuminated LED and by gauge vibration. Measured Values Between the Limits: Audible by 1 short beep, visual by green illuminated LED and by gauge vibration
  Languages:		German and English
  Presettings for Batches:		Each new batch is created with a preset measurement unit and resolution for the displayed measured value. For the gauge variant High, the batch template package is also preselected here. You can adapt these presettings to your requirements. However, you can also change the unit of measurement and the resolution for the measured value display at any time in the batch that has already been created.
  Display:		Graphic display with automatic flipping measuring presentation view (deactivatable) to read measurement results in many different gauge positions. Setting of brightness and contrast (definable for Office, Sunlight and Night).
  Data Transfer (Single Values):		USB: Data transfer to PC, Data import to MSExcel via PC-Datex software; You can gratis download the PC-Datex program from Fischer-Homepage Bluetooth/WiFi: Data transfer to App PHASCOPE® PAINT; Creation and export of reports via App; You can gratis download the App from Google Play Store and Apple App Store
  USB Port:		2.0 Type C - For service purpose. For connecting to PC, for data transfer, max. cable length: 118 inches (3 m)
  Wireless Interface (Only available in the variants High and Enhanced with upgrade package BT+WiFi):		Bluetooth: Bluetooth module integrated in gauge, Bluetooth v2.1 + EDR, class 2 WiFi: WiFi module integrated in gauge, Standards IEEE 802.11b/g/n
  Admissible Ambient Temperature Range During Operation:		+32 - 140°F (0 - 60°C)
  Surface Temperature:		max. +140°F (+60°C)
  Protection Type:		IP65
  Weight (w/Batteries):		0.55 lb. (ca. 251 g)
  Power Supply:		2 Batteries: Mignon, Alkaline or Lithium, LR6, AA, 1.5 V 2 Rechargeable Batteries: Mignon, NiMH, HR6 - AA
  Battery Life (Specifications Valid for +20 °C (+68 °F) Ambient Temperature and Alkaline Batteries Used):		> 8 h for continuous measuring, brightness set to sunlight and deactivated wireless interface
  Measurment Range*:		Steel, iron, cast iron base materials (FE): 0 - 2500 µm (98.4 mils) Non-ferrous metal base materials (NF): 0 - 2000 µm (78.7 mils)
  Trueness* - based on Fischer factory calibration standards:		Steel, iron, cast iron base materials (FE): 0 - 75 µm: ≤ 1.5 µm 75 - 1000 µm: ≤ 2 % of nominal value 1000 - 2000 µm: ≤ 3 % of nominal value 0.9 - 2.9 mils: ≤ 0.06 mils 2.9 - 39.4 mils: ≤ 2 % of nominal value 39.4 - 78.7 mils: ≤ 3 % of nominal value Non-ferrous metal base materials (NF): 0 - 50 µm: ≤ 1 µm 50 - 1000 µm: ≤ 2 % of nominal value 1000 - 2000 µm: ≤ 3 % of nominal value 0 - 2 mils: ≤ 0.04 mils 2 - 39.4 mils: ≤ 2 % of nominal value 39.4 - 78.7 mils: ≤ 3 % of nominal value
  Repeatability Precision* - based on Fischer factory calibration standards 5 single readings per standard:		Steel, iron, cast iron base materials (FE): 0 - 50 µm: ≤ 0.25 µm 50 - 2000 µm: ≤ 0.5 % of reading 0 - 2mils: ≤ 0.04 mils 2 - 78.7 mils: ≤ 0.5 % of reading Non-ferrous metal base materials (NF): 0 - 100 µm: ≤ 0.5 µm 100 - 2000 µm: ≤ 0.5 % of reading 0 - 3.9 mils: ≤ 0.02 mils 3.9 - 78.7 mils: ≤ 0.5 % of reading
  Start Gauge:		Basic Batch Template Package, USB Interface, max. 10,000 measured values in 1 batch memory
  High Gauge:		Basic + Corrosion BatchTemplate Package, USB/BT/WiFi Interface, max. 250,000 measured values in 2500 batches memory
  *The values for measurement range, trueness, repeatability precision and measurement errors are valid for electrically non-conductive coating materials on steel or iron (NC/ FE). The values may differ for measurements on non-ferrous coating materials (NF)

Device including probe, Operations manual, Substrate FE-Base and NF-Base, Calibration foils, Interface cable, Carrying loop, 2 batteries LR6.AA, and Manufacturer’s certificate