MiniTest 70 Coating Thickness Gauges with SIDSP®

Article No. 11028

Dry Film Thickness Gauge Minitest 70F

MiniTest 70 Model F
Ferrous model has a built-in sensor for measuring non-magnetic coatings applied on steel, (0 to 120mils / 0 to 3000µm)

Select your model

excl. taxes & shipping cost

Features

Compact, pocket sized coating thickness gauges are designed for quick and easy non-destructive coating thickness measurement
Simple 4-button operation
Clear display and built-in statistics displaying the number of readings taken
The minimum, maximum, mean values and standard deviation make them ideal for on-site applications
With new simplified operation, no special training is required to operate these gauges
An audible signal confirms reading acquisition
Powered by standard single AA battery and when the battery gets low, a BAT symbol appears to indicate that the battery needs to be changed.
Built-in sensor
Proven measuring methods
Statistics function

Technical Attributes

Data

Part No.:	11028	11029
Measuring Range:	0 - 3mm/120 mils F-range	0 - 3mm/120 mils N-range 0 - 2.5mm/100 mils
Measuring Principles:	Magnetic induction	Magnetic induction/eddy currents
Signal Processing:	SIDSP® sensor-integrated digital 32-Bit-signal processing
Accuracy †:	±(.06 mils +2% of the reading) following two point setup ±(.06 mils + 3% of the reading) following one point setup
Repeatability †:	±(0.04 mils + 1% of the reading)
Low Range Resolution:	.05μm / .02 mils
Min Curvature - Convex:	5 mm/ 0.20”
Min Curvature - Concave:	40 mm/ 1.60”
Min Substrate Thickness:	F: 0.5 mm/ 0.02Æ N: 0.04 mm/ 0.0016”
Units of Measure:	μm/ mils (switchable)
Statistics:	N, AVG, S, Min, Max
Calibration Modes:	One point, two point
Operating Temperature:	-10°C - +60°C / 14°F - 140°F
Storage Temperature:	-20°C - +70°C / -4°F - 158°F
Power Supply:	1 x AA Alkaline or rechargeable battery
Norms and Standards:	DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882 ASTM B 244, B499, D7091, E 376
Dimensions:	Approximately 5.2” long x 1.06: in diameter
Weight with Battery:	80 g or 2.8 oz.
† according to DIN 55350, part 13. SIDSP is a registered trademark of ElektroPhysik. Included: MiniTest 70 F or MiniTest 70 FN; Steel test plate (for model 70F); Steel and aluminum test plates (for model 70 FN); Calibration foils; Operating instructions; Certificate of Conformity; Gage tether; Storage case.

Standards

DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882 ASTM B 244, B499, D7091, E 376

Delivery Content

Included: MiniTest 70 F or MiniTest 70 FN; Steel test plate (for model 70F); Steel and aluminum test plates (for model 70 FN); Calibration foils; Operating instructions; Certificate of Conformity; Gage tether; Storage case

Other Variations

11029

MiniTest 70 Dry Film Thickness Gauge, F