Name: S90 Signature Zahn Viscosity Cup #1
Price: 166.0 USD
Availability: InStock

Features

The S90 Zahn Dip Viscosity Cup is an improved version of the time honored Zahn Signature Series Viscosity Cup.
It is an all stainless steel calibrated Viscosity Dip Cup, and qualifies for certification under ANSI/NCSL Z540 or ISO/IEC 17025, ISO 9001, as applicable.
GARDCO is the only producer authorized to use the Zahn name and has added the S90 designation to identify the improved viscosity cups manufactured on new state-of-the-art equipment to insure optimum quality and uniformity. Calibration of the S90 Zahn Dip Cup matches the earlier Zahn Signature Cup.
Conversion formulas and tables relating flow cup efflux time in seconds to viscosity in centistokes are identical for both series of viscosity cups.
S90 Zahn cups are calibrated with standard "G" series oils traceable to the National Institute of Standards & Technology (NIST).
"G" series Canon calibration oils (standards) are produced in accordance with ISO 9002.
NOTE: Efflux time from these viscosity cups does not meet ASTM specifications. Tables are available for converting S90 Zahn cup efflux time to EZ™ Zahn cup efflux time which complies with ASTM D4212.
Viscosity Cup flow characteristics are defined by a mathematical formula and standard “G” series Canon Calibration oils.
Furnished with each S90 Zahn dip cup is a conversion table relating cup efflux time to the nearest tenth of a second to viscosity in centistokes.
S90 Zahn Viscosity cups, with the above advantages, cannot be confused with other, lesser defined cups as they are produced, calibrated and sold only by Paul N. Gardner Company and authorized dealers.
Ransom & Randolph recommends the S90 Zahn Viscosity Cups as the most reliable viscosity cups to measure and control the consistency of ceramic shell slurries.
S90 Zahn Dip cups do not meet ASTM Specification D4212. Not all S90 Zahn Cups deviate from the standard by the same amount - the range being from near compliance to a variance exceeding a factor of two. Manufacturing procedures include calibration with oils traceable to the National Institute of Standards and Technology (NIST). Certification with compliance to ANSI/NCSL Z540 or ISO/IEC 17025, ISO 9001, as applicable, is available at our Gardco Service Department. Tables are available which convert between S90 Zahn Signature and EZ™ cups of the same number, to the nearest tenth of a second, to assist those who need to work with both established standards.

Technical Attributes

Data

Item Number	Cup No.	Seconds Range	Centistoke Range
13573	1	31 to 60	15 to 78
13575	2	19 to 60	39 to 238
13577	3	11 to 60	63 to 604
13579	4	10 to 60	97 to 899
13581	5	10 to 60	219 to 1627
Certificate of Calibration available at additional charge for all cups.

Cup No.	Efflux Time Seconds “T” from Centistokes “V”	Centistokes “V” from Efflux Time in seconds “T”
1	T = (V + √ (V² + 6805) ) ÷ 3.18	V = 1.59T - 1070 ÷ T
2	T = (V + √ (V² +12707) ) ÷ 8.36	V = 4.18T - 760 ÷ T
3	T = (V + √ (V² + 23529) ) ÷ 20.46	V = 10.23T - 575 ÷ T
4	T = (V + √ (V² + 32983) ) ÷ 30.26	V = 15.13T - 545 ÷ T
5	T = (V + √ (V² + 58903) ) ÷ 54.54	V = 27.27T - 540 ÷ T
Note: Furnished with each cup is a conversion table for each tenth of a second within the cup range.

Catalog Number	Oil Number	Use With Cup Number	Nominal Centistokes* at 25°C., 77°F.
13642	G-20	1	35
13646	G-60	2	120
13649	G-100	3	230
13653	G-350	4 and 5	880
*Certified value is printed on container label. Note: A graph is furnished with each cup showing efflux time of the "G" oil from 20 to 27 degrees Celsius. These standard oils prepared expressly by the Cannon Instrument Company for the Paul N. Gardner Company are produced in accordance with ISO/IEC 17025:2005, ISO/IEC Guide 34:2009, ISO 9001:2008. Caution: Silicone fluids should not be used to calibrate viscosity cups. These materials change the interface between the cup surface and the test material and therefore change the cup calibration. The following is taken from ASTM D445: Viscometers used for silicone fluids should be reserved for the exclusive use of such fluids. Solvent washings from these viscometers should not be used for cleaning other viscometers.

Standards

ASTM D816
ASTM D1084
ASTM D4212

Procedure

Select the cup to be used from the Range Specification table.
Insure that the cup is clean, especially around the orifice.
Adjust temperature of the material to be tested, if necessary.
Holding the cup by the ring, immerse it into the test material.
Measure and record temperature of material encompassed by cup.
Hold cup vertically by inserting index finger into handle ring. In a quick, steady motion, lift the cup out of the sample material, starting the timer when the top edge of the cup breaks the surface. During the flow time, hold the cup no more than 6” above the level of the sample material.
Stop the timer when the first definite break in the stream at the base of the cup is observed.
Record cup name, number and efflux time in seconds with temperature. As an option to the preceding step, refer to the Viscosity Calculator App or conversion table for the cup to determine the centistoke viscosity for the measured efflux time in seconds and record this value and the measured temperature.
Promptly clean the cup taking care not to abrade orifice. Use a length of nylon fishing line to clean the orifice.

S90 Zahn Viscosity Cups

S90 Signature Zahn Viscosity Cup #1